Filter
Top Products
I. SELECT THE DRYING CYCLE
Regular --
Use this cycle for nonpermanent press loads such as towels, underwear, etc. If you touch the "Regular" pad, the dryer will
immediately begin operating, automatically selecting the regular temperature and the normal dryness level. ("E2" appears
in display.) At the end of the cycle there is a 5-minute cool period ("Cool" light turns on), and an electronic tone will sound
four times when the dryer shuts off. During the cool down period, the cool time remaining is shown in the display.
Permanent Press --
Use this cycle for permanent press loads or no-iron fabrics such as nylon, acrylic, polyester or blends. If you touch the
"Permanent Press" pad, the dryer will immediately begin operating, automatically selecting the regular temperature and
normal dryness level. ("E2" appears in display.) At the end of the cycle there is a 10-minute cool-down period. ("Cool"
light turns on.) The display counts down the last 7 minutes of the cool_down period with the electronic tone sounding 4
times every 20 seconds. The signal can be turned off by touching the "Signal On/Off" pad.
NOTE: You can change back and forth from Regular to Permanent Press program any time during the cycle.
m
SELECT THE DRYING TEMPERATURE
Regular Temperature --
This temperature is automatically selected on both the Regular and Permanent Press programs and would be used for
drying most Regular and Permanent Press loads. This would include those garments labeled "Tumble Dry," "Tumble Dry
Medium," etc.
Delicate Temperature --
Touch the "Delicate Temp" pad to select this temperature; touch the pad again to cancel the delicate temperature
selection (returns to regular temperature). Use the delicate temperature for drying those heat sensitive garments labeled
"Tumble Dry Low," "Tumble Dry Warm," etc.
a SELECT THE DRYNESS LEVEL
E1 Less Dry --
To select this dryness level, press the "LESS" pad. This setting would be used for lightweight synthetic loads or loads you
wish to have slightly damp.
E2 Normal Dry --
This dryness level is automatically selected on both the Regular and Permanent Press programs. This dryness level would
be used for the majority of loads.
E3 More Dry --
To select this dryness level, press the "MORE" pad. This setting would be used to completely dry heavyweight, hard-to-
dry loads such as rugs and work clothes or for extra dryness of any load.
NOTE: The "OFF" pad can be touched any time to shut off the dryer, canceling all selections. After removing a load, if a
symbol remains in the display, clear it by touching the "OFF" pad.