Filter
Top Products
24 16022785 Rev. 0 ©2003 Maytag Appliances Company
WARNI NG
!
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Disassembly Procedures
Relay Board Removal
1. Disconnect power supply to unit.
2. Remove Console.
3. Remove the Front Panel.
4. Remove screw, lift front of board up and pull toward
front of machine
Blower and Motor Removal
1. Disconnect power supply to unit.
2. Remove Console.
3. Remove the Front Panel.
4. Remove Belt From Idler Pulley.
5. Remove Tumbler Drum.
6. Remove Snap-Ring and Clamp from Blower Hub.
7. Remove Blower Inlet Cover.
8. Carefully work Blower Wheel off the Motor Shaft.
9. Disconnect and remove Motor Harness.
10.Depress Spring Retainer and remove.