Filter
Top Products
©2003 Maytag Appliances Company 16022785 Rev. 0 21
WARNI NG
!
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Disassembly Procedures
Logic Board Removal
1. Disconnect power supply to unit.
2. Remove Console.
3. Unlatch and disconnect the three plug-in connectors
from logic control board, remove ground wire from
the chassis and carefully remove the four flex circuit
connectors.
Front Access Panel Removal
1. Disconnect power supply to unit.
2. Remove Console.
3. Remove 5 screws securing panel.
3. Roll console out and down.
4. Slide the entire Logic Board to the left, to allow the
white tabs to align with the elongated slots.