Maytag Clothes Dryer Clothes Dryer User Manual


 
Sensor Cycle Settings
Sensor Cycles Temperature Time*
Load Type (Minutes)
SANITIZE High 60
Towels, bedding, children's
clothing
HEAVY DUTY High 50
Heavyweight items, towels, jeans
NORMAL Regular 40
Permanent press blends, work
clothes, sheets
BULKY ITEMS Regular 55
Jackets, comforters, pillows
DELICATE Medium 30
I.ingerie, blouses, washable
woolens
*Estimated Time with Sensor Cycles I)ryness (Normal) setting. Time will vary depending
on load type and load size.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and a drying temperature. When
a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the cycle by pressing the TIME
ADJUST up or down buttons.
Timed Dry
Use this cycle to complete drying if items are still damp after a Sensor Cycle. Timed Dry is
also useful for drying heavyweight and bulky items such as bedspreads and work clothes.
I_ightweight garments, such as exercise wear, can be dried using Timed Dry on a I.ow
temperature setting.
Quick Dry
Use this cycle for drying small loads or loads that need a short drying time.
Manual Preset Cycle Settings
Timed Cycles Temperature Time
Load Type (Minutes)
TIMED DRY
Heavyweight items, bulky items,
bedspreads, work clothes
High 40
QUICK DRY High 25
Small loads
Steam Cycles
In these cycles, a small amount of water is sprayed into the dryer drum after several minutes of
tumbling with heat. The dryer will continue to tumble at Regular heat for the duration of the
cycle. The Steam cycles include Rapid Refresh and Custom Refresh. The heat setting and
cycle time are not adjustable for the Rapid Refresh cycle, but can be adjusted for the Custom
Refresh cycle.
NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free finish
may yield better results than those without.
Use of a fabric softener sheet is not recommended with steam cycles as it may cause
temporary staining on the clothes.
Rapid Refresh
This cycle is best for smoothing out wrinkles and reducing odors from loads consisting of one
to four dry items of wrinkle-free cotton, cotton-polyester blend, common knits and synthetic
garments.
Custom Refresh
This cycle useswater and heat to help smooth out wrinkles from items such as clothes packed
in a suitcase or wrinkled from being [eft in the dryer too long.
Steam Preset Cycle Settings
Timed Cycles Default Default Time
Load Type Temperature* (Minutes)*
RAPID REFRESH Regular 15
Helps to smooth out
wrinkles and reduce odors
from loads consisting of one
to four dry items.
Z'I
CUSTOM REFRESH
Helps to smooth out
wrinkles in loads [eft in the
dryer for an extended
period.
Regular 20
*NOTE: The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum
dry time of 40 minutes. Only the Regular and High temperature settings can be used for the
Custom Refresh cycle.