Filter
Top Products
46
DOOR HINGE ASSEMBLY
SWITCH ASSEMBLY, DOOR LOCK
WHEN FOREIGN MATERIAL STACK BETWEEN DRUM AND TUB
Two screw are unscrewed on the door and the
door is disassembled.
The cabinet cover clamp is removed and the
gasket is released.
Two screws are unscrewed on the door hinge.
The door hinge is disassembled by pressing
the door hinge arm inside the cabinet cover.
The cabinet cover clamp is removed and
the gasket is released.
Two screws are unscrewed.
The door lock S/W is disconnected from the
wiring connector and the strap.
The heater is removed.
The foreign material (wire, coin, etc) is removed
by inserting the long bar in the hole.