Filter
Top Products
9
TEST OPERATION
Pre
1200
1000
800
600
no Spin
Main
Super
Normal
Rinse hold
P
(Wash) (Rinse) (Spin)
Connect the power plug to
the outlet.
Connect the inlet hose.
Troubleshooting refer to (8-4.ERROR DISPLAY)
Assemble and disassemble refer to (10.Disassembly Instructions)
Preparation for
washing.
Press the
POWER ( )
button.
Press the
PROGRAM ( )
button.
Press the
(START/PAUSE)
( ) button.
In case of coloreds
program.
In case of coloreds
program.
Press the button (WATER TEMP)
( ) and then the
present temperature in
displayed.
Check if the drum rotates to
clockwise and counterclockwise.
Check shower because the
water supplied on the door
at first.
After power off, press the
DOOR OPEN ( ) button to
check the door open.
If SVC is needed, during
check and remove
the remaining water by pulling
out the hose cap.
Check the water heating. Check automatic reverse Check the water supply.
turn.
Check the drain and spin Power off Water removal
P