Filter
Top Products
24
■ WD-8030(W)(F)(H)/WD-8040W(F)(H)/WD-1042F(H)/WD-803(4)0F(H)B/WD-102(4)2F(H)B
If you press the Start/Pausebutton when an error in displayed, any error except
SENSOR PRESSURE S/W ERROR will disappear and the machine will change into pause status.
In case of SENSOR PRESSURE S/W ERROR, THERMISTOR ERRORif the error is not resolved
within 20 sec. In the case of other errors, if the error is not resolved within 4 min. power will be turned
off automatically and the error code will blink. But in case of OVER FLOW ERROR, power will not
be turned off.
95 C
60 C
40 C
Cold
Door Lock
800
600
no Spin
(1000)
(800)
(600)
( ) :WD-1042F(H)
Pre
Main
for
WD-8030F(H)B
WD-8040F(H)B
WD-1022F(H)B
WD-1042F(H)B
1000
800
600
400
no spin
Rinse Hold
Super
Normal
for
WD-8030F(H)B
WD-8040F(H)B
WD-1022F(H)B
WD-1042F(H)B
95
60
50
40
30
Cold
Coloreds
Whites
Rapid
Synthetic
Wool
Delicate
ERROR SYMPTOM CAUSE
1 WATER INLET Water has not reached to the pre-set level within 4 min. since
ERROR inlet valve operated, or water has not reached to the normal
level within 25 min.
2 IMBALANCE The appliance is tilted.
ERROR
Laundry is gathered to one side.
Non-distributable things are put into the drum.
3 DRAIN ERROR Water has not drained enough within 5 min.
4 OVERFLOW Water is automatically being pumped out because too much
ERROR water is in the tub.
5
SENSOR PRESSURE
S/W ERROR
The sensor pressure switch is out of order.
6 DOOR OPEN The
Start/Pause
button is pressed with the door open.
ERROR The door switch is out of order.
7 THERMISTOR
ERROR The thermistor is out of order.