Kenmore Clothes Dryer Clothes Dryer User Manual


 
CHANGINGTHEDRUMLIGHT
The dryer light automatically turns on
inside the dryer drum when you open the
door. if your dryer has a drum light, it will
look like one of the styles on this page.
To replace bulb:
STEP 1. Disconnect power.
STEP 2. Open the dryer door. Remove
the light bulb cover from the back wall of
the dryer by removing the screw located
in the lower right corner of the cover.
STEP 3. Check that the light bulb is
screwed in tightly. The vibration of the
dryer may cause the bulb to come loose.
It this is not the problem, remove the
light bulb by turning it counterclockwise.
IMPORTANT: Replace the bulb with
a 25-watt, 120V A.C. bulb only.
STEP 4. Install light bulb by turning
it clockwise.
STEP 5. Replace light bulb cover.
STEP 6. Plug in power supply cord
or turn on electric supply.
To replace bulb:
STEP 1. Disconnect power.
STEP 2. Open the dryer door. Turn the
drum light lens clockwise and remove it.
STEP 3. Check that the light bulb is
screwed in tightly. The vibration of the
dryer may cause the bulb to come loose.
It this is not the problem, remove the
light bulb by turning it counterclockwise.
IMPORTANT: Replace the bulb with
a 4g-watt, 120V A.C. bulb only.
STEP 4. Install light bulb by turning
it clockwise.
STEP 5. Find the locking pins on the
drum light lens and place them directly
over the matching notches on drum light
housing. Push lens in and turn counter-
clockwise to lock it in place.
STEP 6. Plug in power supply cord
or turn on electric supply.
MOVING CARE
Disconnect power.
Make sure leveling legs are secure
in dryer base.
Use masking tape to secure dryer
door.
VACATION CARE
Disconnect power.
Clean lint screen.
40