Filter
Top Products
MAINTENANCE
Cleaning the Water Inlet Filters
Jfthe washer detects that water is notentering the dispenser, an
error message wi]]show on the display. Inletvalve fi_terscreens
_uld be plugged by hard water scale, sediment in the water
supply, plumbing scale, etc,
NOTE: The inJetscreens protect the delicate parts of the fill
valve from being damaged by particbs that may get into the
valves with the water supply, Operating the washer with the
filters removed could cause a valve to fail open resulting in
flooding and/or property damage.
Inlet Filter
1. Turn off both watertaps _mpletely. Unscrewthe hotand
cold water lines from the ba_ of the washer.
IMPORTANT: Use ONLY the inlet hoses provided with this
laundry product, Aftermarket hoses are not guaranteed to fit or
function correctly Other hoses may not tighten correctly and
could cause leaks, Subsequent damage to product or property
wi]] not _ _vered under the terms of the product warranty.
2. Care_J]]yremovethe fi_tersfrom the watervalves and soak
them in white vinegar or a lime scale remover, following the
manufa_urer's instructions. Rinse thoroughly before
reinstalling,
Press the fi_tersback into place and reattach the water lines,
NOTE: The inlet screens protect the delicate parts of the fiii
valve from being damaged by particles that may get into the
valves with the water supply. Operating the washer with the
fi_tersremoved could cause a valve to fail open resui8ng in
flowing and/or property damage.
23