Filter
Top Products
iiiii ii ii i!ii!ii!i ii!iiiiii!
ijjii!ii!!!!!ii i!i!!ili!
iiiiiiiiiiiiiiiiiiiiiii!iiiii!i iiii!i!ili!ii!iiii
iiiiiiiiiiiiiiiiiiiiiiiiiii, iiiiiiii ii ii ili
CYCLE OPTION BUTTONS
Your washing machine features several additional cycle
options to customize cycles to meet your individual needs,
O Turn the washer and turn the selector knob to
on
cycle
_]ect the desired cycle.
O Use the modifier buttons the forcycle
to
adjust settings
that cycle.
O Press the cycle option button(s) for the option(s) you
would like to add. The button will light when that option
is selected.
If the selected option is not allowed for the Elected
cycle, the chime will sound twice to informyou that it is
not allowed.
O Press the START/PAUSE button to start the cycle. The
washer willstart automatically after a brief delay for
locking the door,
NOTE: To protect your garments, not every option is
available with every cycle. See the CYCLE GUIDE for
details.
DELAY START
Onc4_you have selected the cycle and other
settings, press this button todelay the start
of the wash cycle, Each press of the button
Delay Start increases the delay time by one hour, for up
to 19 hours Once the desired delay time is
set, press the START/PAUSE button to start the delay time.
If the START/PAUSE button is not pressed within 4
minutes, the control will shut off and the settings will be lost.
2ndRINSE
2 _ Rinse
This option will add an extra rinse to the
selected cycle. Use this option to help
ensure the removal of detergent or bleach
residue from fabric.
STAIN TREAT
Use thisoption for heavily soiled loads that
need improved Main treatment. When
STAIN TREAT is selected, the water
StainTreat temperature for the selected cycle will begin
as warm water to help prevent the setting of
_rtain types of stains. Then as the cycle progresses, the
water will be heated to higher temperatures to help remove
stains that require treatment at higher temperatures. This
option is designed for optimum stain removal
NOTE:
• If STAIN TREAT is selected withthe SANITARY cycle, the
cycle will begin with very hot water since that is default for
that cycle and cannot be changed.
2O
AUTO SOAK
Use the AUTO SOAK option to presoak
garments to help remove difficult spots or
stains on fabrics. This option provides a
_to Seek 30 minute presoak prior to the start of the
selected cycle.
O Add detergent only to the Main wash of
compartment
the dispenser drawer. (See "Using the Dispenser" on
pages 16-17,)
O Select desired cycle.
O Select cycle modifiers,
O Press the START/PAUSE
SPECIAL FUNCTIONS
CONTROL LOCK
Use thisoption to disable the controls,
This feature allows you to prevent children
from changing cycles or operating the
Con_olLock machine. Once set, the CONTROL LOCK
must be turned off before the controls can
be used. On_ the washer has shut off, the power button
will allow the machine to be turned on, but the ccntrols will
still be locked. When the controls are locked, °CL" will be
displayed alternately with the estimated time remaining.
Press and hold the CONTROL LOCK button for 5 seconds
to activate or deactivate the control&
To lockthe controls withoutrunning a cycle, turn the washer
on then press and hold the CONTROL LOCK button for 5
seconds. The ccntrois will be locked, and the washer will
power off after 4 minutes.
CLEAN WASHER
A buildup of detergent residue can occur in
the wash tub over time and can lead to a
mildewy or musty smell. The CLEAN
CleonWo_r WASHER cycle is specially designed to
remove this buildup using bleach or other
cleaner designed specifically for cleaning front load washers.
The CLEAN WASHER cycle should be run on_ a month, or
more often under heavy use conditions or ifodor is present.
O
O
Turn on the washer and press the CLEAN WASHER
button. Selecting any other cycle after CLEAN WASHER
has been selected will cause the CLEAN WASHER
cycle to be cancelled.
Fill the bleach dispenser to the MAX line with iiquid
chlorine bleach*. Do not overfill the bleach dispenser.
Overfilling will cause the bleach to be dispensed
immediately.
Press the START/PAUSE to start the cycle.
After the cycle has ended, open the door and allow the
drum interior to dry completely.
NOTE: Do NOT use this cycle with clothes, and do NOT
add detergent or fabric softener,
* For powdered tub cleaners, add the cleaner to the main
wash compartment of the dispenser drawer_Place tabiet
cleaners directly intothe tub Always follow the cleaner
manufacturers instructions and recommendations