Filter
Top Products
8
Cycle Settings
Appropriate wash temperature, spin speeds, soil level and
options will automatically be displayed for each cycle. The
settings can be changed before the cycle is started.
WASH/RINSE WATER TEMPERATURE
To change the preset temperature, press the Wash/Rinse
button to scroll to the desired setting. Select a wash water
temperature according to fi ber content, colorfastness and
soil level. A cold water rinse saves energy and reduces
wrinkling.
To protect your fabrics, not all temperatures are available
with every cycle. The indicator will not light if the setting is
not available with that cycle.
Auto Temp wash water temperatures are automatically
regulated to maximize detergent eff ectiveness and im-
prove washing performance. The water heater setting and
its distance from the washer, water usage in other parts of
the home, and seasonally low ground water temperature in
some geographic areas can aff ect water temperature.
Extra Hot/Cold
Use this setting for heavily soiled colorfast fabrics such
as towels, bedding, and children’s clothing. Extra Hot/
Cold provides wash water heated with an internal boost
heater.
Hot/Cold
Use this setting for heavily soiled white or colorfast cot-
tons and blends.
Warm/Warm
Use this setting when a warm water rinse is desired.
Warm/Cold
Use this setting for normally soiled white or colorfast cot-
tons or blends.
Cold/Cold
Wash and rinse temperatures are equivalent to tem-
perature of cold tap supply. Use this selection for lightly
soiled non-colorfast items, knits, delicates, and hand
washables and other fabrics and colors that are prone to
dye transfer. For use with cold water
detergents.
SPIN SPEED
SOIL LEVEL
CHIME
To protect your fabrics, not all spin speeds are available
with every cycle. The indicator will not light if the setting is
not available with that cycle.
Extra High, High, Medium and Low spin speeds are
available for appropriate cycles. The spin speed and/or
duration of fi nal spin vary from model to model and cycle
to cycle.
Increasing the spin speed will extract more water, decrease
drying time and conserve energy. Decreasing the spin
speed will reduce wrinkling.
Select Low spin speed to gently spin items that should be
line dried.
Use No Spin to omit the fi nal spin at the end of the cycle.
The load will be very wet. Remove items from the wash
drum to drip dry or select a Rinse & Spin cycle to remove
excess water at a more convenient time.
Adjust the wash time in 3-minute increments based on the
soil level of each load. Five soil levels are available.
A chime will sound at the end of the cycle when this option
is selected. The signal has an adjustable volume level or
can be turned off .
Operating Instructions
Follow the fabric care label instructions
on items to be washed.
For best results
NOTE
To change the temperature once the cycle has begun,
press the PAUSE button, make the new selection and
press START again.