Filter
Top Products
Problem Possible Cause Solution
Lint in Load Lint screen is clogged. Clean lint screen. Checkfor air
movement.
Improper sorting. Sort lint givers from lint takers
and by color.
Load istoo big or heavy. Dry smaller loads so lint can be
carried to the Iint screen.
Load is overdried. Use correct dryer settings for fabric.
Overdrying can cause lint-attracting
static (see "OPERATION").
Paper or tissue in pockets. Clean out pockets before drying.
Pilling being mistaken for lint. Pilling (surface fuzz) is caused by
normal wear and Iaundering.
Stains on Load Improper use of fabric softener Use fabric softenersheets in dryer.Add
in washer, at beginning of cycle when load is coId.
Drying soiled items. Items need to be clean before
being dried.
Items Overdrying. Match dryer settings to fabric type
Shrinking (see "OPERATION").
Poor garment quality. Check quality of garment before
purchasing.
Manufacturer's care label Follow fabric care Iabel instructions
instructions not followed, carefully.
Loads are Overloading. Drysmaller loads that can tumbIe freely.
Wrinkled Overdrying. Match dryer settings to fabric type
(see "OPERATION").
Load left in dryer at the Remove load as soon as tumbling
end of cycle, stops.
Odors Household chemicals, paint, Do not use dryer while these chemical
or varnish being drawn into fumes are in the air.
dryer.
Gas Leak Turn oft gas supply line. Leave your
house, then call your local gas
company.
Unusual Clicking (Gas Dryers) - Norma! operation.
Sounds gas valve clicking.
Thumping of rollers when Thump will go away after 5 minutes
laundry center has set. of drying.
59