Filter
Top Products
7
4.7 Wash time message:
• It is on when the washing cycle starts and when
the duration is shown on the display.
• It goes off at the end of the cycle, and during the
delayed start selection.
• It blinks during the time calculation if you have
selected a
«proportional» programme.
4.8 Quick message: it appears when the QUICK
option is selected.
4.9 Delay start message: it appears during the
selection of the delayed start.
4.10 Child safety Lock symbol: it appears when this
function is enabled. This function works in two
different ways:
●If enabled before the «Start/Pause» button
is pressed, it prevents the machine from
being started.
●If enabled after pressing the «Start/Pause»
button, it prevents any changes being made
to the programmes or options selected.
To enable or disable this function, press the
«Temperature» and «Spin
» buttons
simultaneously for approx 6 seconds until the
icon appears on or disappears from the
display.
Acoustic Signal
At the end of a washing cycle and in case of
operating problems, an acoustic signal will sound.
You can deactivate the acoustic signal (except if
there is a fault) by pressing the "Options" and the
"Extra rinse" buttons simultaneously for about 5
seconds.
By pressing these buttons again the acoustic signal is
reactivated.
Buttons (2, 3, 5, 6, 7, 8, 9, 10, 11 and 12)
«On/Off» / «Reset» programme
button (2)
Press this button to switch the washing machine on.
The green light of button 10 starts blinking. The pilot
light relevant to the programme automatically proposed
by the appliance lights up. The display goes on and
shows some information about the selected
programme.
Press this button again to switch the machine off.
Warning!
Always switch off the appliance by pressing
button 2. (Cancel programme). This ensures that the
new programme begins correctly and all previously set
functions are cancelled.
«Programme selector» buttons (3)
Press these buttons repeatedly to select the
programme on the basis of the type of laundry to be
washed or a special programme. The pilot light relevant
to the selected programme lights up. The washing
machine proposes a temperature and automatically
selects the maximum spin value provided for the
programme you have chosen. You can change these
values by operating buttons 5 and 6.
The duration of the selected washing programme is
shown on the display (4.6).
The display also shows the options compatible with the
programme (except Extra rinse, Quick and Delay start).
Warning!
If you press one of these buttons while a wash
programme is running, the red pilot light of button 10
blinks three times and Err is displayed to show a
wrong selection.
«Temperature» button (5)
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the washing machine (4.1).
Note!
To see the maximum and the minimum temperature
provided for each of the washing programmes, see
chapter «Washing Programmes».
132961440.qxd 25/08/2008 11.49 Pagina 7