Filter
Top Products
27
In the event of your appliance requiring service, or if you
wish to purchase spare parts, please contact our
extended warranty administrators by telephoning:
0870 01 07887
They will give you details for your local Service Force
Centre.
Service Force are the appointed national appliance repair
agents responsible for warranty repairs to this appliance.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The purchase date and found on your receipt.
5. The model and serial number of the appliance (found
on the rating plate - see picture)
So that you always have these numbers to hand, we
recommend you to make a note of them here.
Model (Mod.)..................................................................................
PNC (Prod. No.)............................................................................
SN (Ser. No.)...................................................................................
Your washing machine is covered by a 3 year parts
and labour guarantee (see separate details given
at point of sale). Please retain your purchase
receipt safely for the service .
Spare parts
An authorised service engineer should service this
product, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the
machine yourself.
Repairs carried out by inexperienced persons may cause
injury or serious malfunctioning. Contact your local
Service Force Centre.
Mod. ..........
Prod. No. ...........
Ser. No. .........
M
o
d
. ..
.....
...
P
rod
. N
o
. .
..
...
.....
S
er. No
.
.......
..
P0042 BD
Repairs - After sales service
Permanent connection
In the case of permanent connection it is necessary
that you install a double pole switch between the
appliance and the electricity supply (mains), with a
minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance
with the current electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
The power supply cable must be easily
accessible after installing the appliance.
The appliance should not be connected to
the electrical supply by means of an
extension cable.
132961440.qxd 25/08/2008 11.49 Pagina 27