Filter
Top Products
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-7551 – UW50 Utensil/Pan Washer Page 1 of 8
UW50
UTENSIL/PAN WASHER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
UW50 UTENSIL/PAN WASHER
STANDARD FEATURES
■ 2.1 gallons of water per rack (booster equipped
models)
■ 19 racks per hour
■ Timed wash cycles for 2, 4 or 6 minutes
■ Stainless steel tank, tank shelf, chamber, trim
panels, frame and feet
■ Solid state heat controls
■ Front loading, split-door conguration
■ Flat-bottomed, stainless steel frame rack, with
one at grid rack and two tray support racks
■ Chamber accepts 16 full-sized sheet pans, or
140-quart mixing bowl
■ Two upper and two lower revolving, debossed
non-clogging stainless steel wash arms
■ Two upper and lower revolving stainless steel
rinse arms
■ Heavy-duty door and door hinges
■ Large, removable stainless steel scrap screen
and scrap bucket
■ Choice of 10 KW electric, steam injector/steam
coil or gas tank heat
■ Adjustable wash cycle timer
■ Stainless steel front panel
■ Integrated detergent connections
■ Top-mounted dial thermometers
■ Door actuated drain closer
■ Heavy-duty 5 H.P. motor
■ Door interlock switch
■ Corrosion-resistant impeller
■ Timed ll
■ Positive low water protection
■ Spray hose (standard on electric booster heater
equipped models only)
VOLTAGE
❑ 208/60/3
❑ 240/60/3
❑ 480/60/3
MODEL
❑ UW50
OPTIONS AT EXTRA COST
❑ 10 KW electric tank heat
❑ Natural or LP gas tank heat
❑ 14 KW electric booster heater
❑ Vent fan control
❑ Steam injector or steam coil tank heat
ACCESSORIES
❑ Power vent fan kit
❑ Drain water tempering kit
❑ Rack insert for 30" trays
❑ Spray hose assembly (eld installed for non-
booster equipped machines only)
❑ Operator training video
❑ 20" x 20" peg or combination racks
Specications, Details and Dimensions on Inside and Back.
R
UW50 Untensil Washer 208-240/60/3 Page 3 of 112