Filter
Top Products
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 8 of 8 F-7551 – UW50 Utensil/Pan Washer
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
UW50
UTENSIL/PAN WASHER
F-7551 (REV. 01/09) LITHO IN U.S.A. (H-01)
SPECIFICATIONS
DESIGN: Heavy-duty, fully automatic, front-loading
utensil/pan washer with large split door system. Upper
door section slides upward as the lower door section is
pulled down. Stainless steel pull-out rack allows easy
loading for large utensils and pans. Three variable wash
cycles ensure thorough cleaning and sanitizing.
CONSTRUCTION: Stainless steel tank and hood, frame,
legs and adjustable feet. Front enclosure panel standard.
PUMP: Cast iron pump integral with motor, Ni-Resist
impeller, horizontally mounted. Pump capacity 343 gpm.
MOTOR: 5 H.P., available in 208/60/3, 240/60/3, or
480/60/3 congurations. Factory sealed lubrication,
drip proof with sealed ball bearings. Thermal overload
protection.
RACKS PER HOUR:
Wash Cycle Racks/Hr.
2 minute 19
4 minute 12
6 minute 9
WASH CYCLE: Complete automatic operation. Cycle may
be interrupted any time by opening door. The selected
cycle will restart from the begining when door is closed
again.
Upper and lower revolving stainless steel wash arms, with
computer designed, debossed, anti-clog wash nozzles,
direct high pressure wash ow to all soiled surfaces.
Large, sloping, perforated, removable stainless steel scrap
screens direct food soils to a deep perforated stainless
steel scrap basket.
Scrap basket and strainer easily removed.
RINSE CYCLE: 180°F nal sanitizing rinse through two
upper and two lower revolving stainless steel rinse arms.
Rinse arms removable without tools.
WATER USAGE PER RACK:
2.1 gallons per rack (booster equipped models)
2.2 gallons per rack (non-booster equipped models)
RACKING: Standard rack assortment consists of one at-
bottomed frame rack, one at grid insert rack, and two tray
support insert racks. External rack dimensions are 40
7
⁄8"
wide, 22
7
⁄8" deep, and 4
1
⁄8" high.
Standard at-bottomed frame rack also accepts (2)
20" x 20" combination or peg racks per cycle.
SPECIFICATIONS: Listed by Underwriters Laboratories
Inc., NSF International and CUL.
UW50 Untensil Washer 208-240/60/3 Page 10 of 112