Filter
Top Products
14
The machine settings on the Help feature
allow you to control the volume of the button beep
and end-of-cycle signal, and turn the washer/dryer
communication feature on or off.
Button Beep
The button beep controls the volume of the beep that
is made when you press any of the buttons or the
Touch Screen.
To change the volume of the button beep:
1 From the Home Screen, press the HELP button.
2 Select MACHINE PREFERENCES from
the Touch Screen.
3 Select BUTTON BEEP from the Touch Screen.
4 Use the arrows to make the volume louder
or softer, or to turn the beep off.
5 Select OK from the Touch Screen.
The new volume is now saved as the default setting.
Washer/Dryer Communication
Washer/Dryer communication allows your washer to
send cycle information to your dryer to create a dry
cycle that matches your wash load.
After the wash cycle is complete, communication
begins once either the washer or dryer Touch Screen
is activated or washer lid is up.
Once the information is sent, your dryer will create
the optimal dry cycle for your load.
If you have sorted your wash load by color or garment
and therefore selected color or garment on the
washer Touch Screen, upon transferring the
information to the dryer, the dryer will ask you to
select the fabric type. This is normal, and is done to
properly optimize drying time for the just-washed
load. After selecting the fabric type, the dryer display
screen will be shown. After reviewing, press START.
If the dryer display screen is off and you want to
use the “Washer Recommended Cycle” to dry your
clothes, touch the display screen on the dryer to
activate. You will have a “Washer Recommended
Cycle” button appear on your dryer Home Screen.
Push it for retrieving the recommended dryer cycle
for the just-washed load.
To turn the Washer/Dryer Communication feature on
or off:
1 From the Home Screen, press the HELP button.
2 Select MACHINE PREFERENCES from
the Touch Screen.
3 Select WASHER/DRYER COMMUNICATION
from the Touch Screen.
4 Touch the pad at the bottom of the Touch Screen
to select ON or OFF.
5 Select OK from the Touch Screen.
End-of-Cycle Signal
The End-of-Cycle signal alerts you when the cycle is
complete.
To change the volume of the end-of-cycle signal:
1 From the Home Screen, press the HELP button.
2 Select MACHINE PREFERENCES from the
Touch Screen.
3 Select END OF CYCLE SIGNAL from the Touch
Screen.
4 Use the arrows to make the volume louder
or softer, or to turn the signal off.
5 Select OK from the Touch Screen.
The new volume is now saved as the default setting.
Language (on some models)
The language button allows the user to switch
between English and Spanish.
To change the language:
1 From the Home Screen, press the HELP button.
2 Select MACHINE
PREFERENCES/PREFERENCIAS DE LA
MÁQUINA from the Touch Screen.
3 Select LANGUAGE/IDIOMA from the Touch
Screen.
4 Select either ENGLISH or EL ESPANOL from the
Touch Screen.
5 Select OK from the Touch Screen.
Help
www.GEAppliances.com
MACHINE PREFERENCES
LANGUAGE
BUTTON BEEP
END OF CYCLE
SIGNAL
WASHER/DRYER
COMMUNICATION
Setting the
Machine
Preferences