Filter
Top Products
14
Changing the wash cycle options
1
Select the wash option you wish to modify, highlight it by touching the SELECT button.
Regular wash
START?
FAST SPINWARM SOFTENER
2
Scroll to the appropriate setting and press SELECT. This will highlight your choice to show you
that it has been selected.
CHOOSE
TEMP
COLDER WARMER
WARM
3
You will then be given the option whether to save this modified option for future washes or to
just use it for this one. If you select Save for Future Washes, the machine will save the changed
wash option for that cycle only. Please note: This option is not available for the Delay Start, Drip
Dry or Soak selections).
4
Press SELECT to select.
5
You will then return to the main wash options screen.
6
Touch START/PAUSE or SELECT to begin the wash.
Auto Drain
Unsupervised clothes washers filled with water can present a drowning hazard to small children.
In order to minimise any risk of this type of accident, your AquaSmart™ has been
pre-programmed to know when this hazard is created, and drain the wash water to a safe level.
If you pause your AquaSmart™ at any time during the wash cycle when there is water in the bowl,
the machine will activate the AUTO DRAIN function after 3 minutes. This will drain the water in
the wash bowl to an acceptable level, removing any potential hazard.
A warning message will be displayed to warn you prior to AUTO DRAIN being activated.
Note: If you wish to change any of the wash options while your AquaSmart™ is running please
press START/PAUSE then change the required option.