Filter
Top Products
32
If your washer beeps for help
LID LOCKED light is flashing.
Make sure the lid is closed.
Press START/PAUSE (refer to page 10).
If the symptom persists call your Fisher & Paykel Dealer or Authorised Repairer.
First RINSE or SPIN progress light is flashing as well as the SPIN SPEED light.
Wash load is out of balance. Ensure the machine is stationary. Manually redistribute the load.
Check the machine is level (refer to page 3).
Single beep every second and... possible solutions
Some lights are on but the pattern of lights is unfamiliar.
1
Turn your machine off at the wall,
2
Wait for 60 seconds and turn it back on.
3
Check the machine is level (refer to page 3).
4
Remove load and retry.
5
Put through a deep RINSE and SPIN.
6
If the fault re-occurs repeat Step 1.
If the machine still will not work call your Fisher & Paykel Dealer or Authorised Repairer to
arrange service (refer to page 38).