Filter
Top Products
24
Changing pre-set options
Wash temperatures
On the QuickSmart™ model the WARM temperature can be adjusted if you think it is too hot or
too cold.
On the WashSmart™ model all wash temperatures can be individually adjusted.
Note: the hot and cold temperatures will be the same as the respective water supply temperatures.
1
When in option adjustment mode, select the WASH TEMP you want to adjust.
2
The wash progress lights show the temperature adjustment possible for that temperature.
Pressing the ADVANCE button will cause the wash progress light that is on to change.
Advancing the wash progress light will increase the wash temperature. If you keep
pressing the ADVANCE button, the light will scroll back to the coldest setting available for
that wash temperature.
Fig.36 Adjusting the temperature setting
Note: while WashSmart™ model is shown, the setting of the QuickSmart™ model is identical
Note: if you have a QuickSmart™ model and still can’t get the temperature you require, advance
the progress light (while in the options adjustment mode) across to SPIN and manually adjust
the flow of the taps.
Rinse options
You can change the pre-set rinse options
on the HEAVY DUTY and REGULAR cycles of
the WashSmart™ model, and on the HEAVY
DUTY, REGULAR and WOOL cycles of the
QuickSmart™ model.
The default rinse option on these cycles
is a spray rinse followed by a deep rinse.
The first step of the default rinse can be
replaced with a short spin, or a deep rinse,
by selecting another option.
If you have a problem with impurities in your water supply you may get a better result if you
change the rinse option to two DEEP rinses. If you wish to conserve water, change the rinse
option to one DEEP rinse. If you want to conserve even more water, choose the ECO option.
Rinse options
Rinse 1 Rinse 2
MED spin light on
Deep
rinse
Deep
rinse
SLOW spin light on
Short
spin
Deep
rinse
HOLD light on
(default)
Spray
rinse
Deep
rinse