Filter
Top Products
29
Saving water
Water saving tips
Full loads are more efficient than part loads.
Use the ECO option (refer to page 14).
Adjust the RINSE option on REGULAR and HEAVY DUTY cycles (WashSmart™ model), and
REGULAR, HEAVY DUTY and WOOL cycles (QuickSmart™ model) to one deep rinse (refer to
page24).
Adjust AUTO water level to fill with less water (WashSmart™ model only, page 25).
Recycling the wash water
WashSmart™ model only
Your washer also offers several ways of reusing the wash and rinse water.
1
Select SOAK on the first wash cycle.
2
Remove the clothes at the end of the wash phase and add the second load to the wash water.
3
Select the wash cycle for the second load. You may need to add extra detergent.
4
Remove the second load at the end of the cycle.
5
Replace the first load, select RINSE and complete the cycle.
Recycling the water from a deep rinse
1
Select SPIN HOLD on the first wash cycle (Note: you cannot use the ECO option when recycling
the water from a deep rinse).
2
Remove the clothes at the end of the rinse and add the second load to the rinse water.
3
Select the wash cycle for the second load.
4
Remove the second load at the end of the cycle.
5
Replace the first load and spin dry.