Filter
Top Products
Curtains,
Remove drapery weights and hooks before laundering.
slipcovers
1. Use lowest temperature or an Air setting.
l Draperies,
2. Leave room in dryer for load to fluff.
slipcovers
3. Remove from dryer while slightly damp. Do not overdry.
For slipcovers, replace while still slightly damp. They will dry to fit tightly.
l Sheers, some
Dry only a few minutes.
synthetic curtains
l Bonded or
Do not overdry or tumble in high heat. Overdrying loosens the adhesive
laminated fabrics
and causes fabrics to separate.
Dlapers, baby
Wash and dry small items in a mesh bag or pillowcase for convenient
clothes
handling.
1. Dry according to fabric and cycle settings listed on your control panel
page (pages 9-11).
2. Remove diapers and cotton knit items while still slightly damp. They
will feel softer, shrink less, and be easier to fold.
Elastic items
Dry at lowest temperature setting. Remove from dryer while still slightly
damp.
Fiberglass
Do not machine wash or dry fiberglass materials. Small particles can stick
materials
to fabrics washed or dried in following loads and cause skin irritation.
Flame-
Some items have been treated with a flame-retardant finish to improve
retardant
their resistance to burning. Such items are clearly labeled. To retain
finishes
flame-retardant qualities through continuous use and washing, clean and
dry according to the manufacturer’s instructions.
Napped
Dry separately or with similar colors to avoid lint transfer. Follow care
items
label directions.
l Corduroy,
1. Dry according to fabric and cycle settings shown on your control panel
velveteen
page (pages 9-11).
2. Remove from dryer while there is still a trace of moisture.
3. Smooth, reshape and air dry before putting away.
Quilted, down-
Follow care label instructions.
filled items
1. Dry one at a time.
2. Remove from dryer and shake or fluff the item during the drying cycle.
3. Smooth and reshape before putting away.
Snowsuits,
Check label for fiber content, then see your control panel page
jackets
(pages 9-11) for cycle and temperature recommendations.
l Nylon,
Follow care label directions.
polyester-base
1. Dry garment for about 10 minutes. Remove and turn inside out. Dry for
10 more minutes.
2. Remove from dryer immediately and hang on a non-rusting hanger to
finish drying. This will help eliminate wrinkles.
Tinted, dyed or
Dry according to fabric, weight and care label instructions. Wipe the dryer
non-colorfast
drum carefully to ren ove any dye or lint that can be transferred to other
items
loads. See “Cleaning the dryer interior” on page 13.
18