Filter
Top Products
Operating Your Dryer
In This Section
r
Paw
Paw
Before starting
your dryer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting a cycle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
7
Starting or
atopping your dryer
. . . . . . . . . . . . . . . . . . . . . . . 6
Operating your dryer properly assures the best drying results. This section gives you important
information to help you to select a cycle, time, and temperature.
Before starting your dryer
Refer to the information below, and ‘Laundry
Tips” for control setting, sorting, and loading
NOTE: If your dryer has a Consumer Buy
Guide, remove it and place it with your Use
information.
and Care Guide.
Starting or stopping your dryer
Starting your dryer
Close the door and select a cycle and tempera-
ture. See pages 7-11 for additional setting
information. Your dryer automatically stops when
a cycle ends.
Stopping and restarting your
dryer
Open the dryer door or turn the Cycle Control
Knob to OFF. Close the door; make new selec-
tions (if necessary). Push the Start Button.
NOTE: The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If the
dryer is stopped before the cycle is finished, turn
the Cycle Control Knob to an OFF area.
End of cycle signal
(on some models)
The dryer sounds a signal to let you know when
the cycle is finished. The signal is not adjustable
but can be turned off (on some models).
The signal is helpful when you are drying
permanent press, synthetics, and other items
that should be taken out as soon as the
dryer stops.
li your model has an End of Cycle Slgnal
selector:
l Turn the End of Cycle Signal selector to ON if
you desire a signal to let you know when the
cycle is finished.
l Turn the End of Cycle Signal selector to OFF if
you do not desire a signal when the cycle is
finished.
6