Filter
Top Products
4.
Use an appropriate tool and exert pressure to unfasten locking block D from
the snap-on fixture, take out and re-insert on the other side having rotated the
block through 180°.
5. Unscrew hinge A from the loading door, rotate through 180°, re-insert on the
opposite side and screw down.
6.
Re-insert cover plates B and C on the opposite site having first rotated them
through 180°.
E
E
F
F
G
G
7.
Unscrew cover plates E from the front of the machine, rotate through 180°,
screw on the opposite side.
8. Unscrew door lock F, push down slightly and remove from the front of the
machine.
9.
Disconnect cable connector from door lock F.
10.
Press snap-in button G in and down, press cover down slightly and remove
from front of the machine.
11.
Disconnect cable connector from cover G.
12. Change door lock F over to the opposite side, insert the cable connector and
screw down the door interlock.
13. On the other side, insert the cable connector in cover G, insert cover and allow
snap-in button to lock into place.
14. Insert loading door and hinges into recesses on the front of the machine and
screw down.
installation electrolux 35