Electrolux TK K2 E Clothes Dryer User Manual


 
Installation
Appliance positioning
It is recommended that, for your convenience, the machine is positioned close to
your washing machine.
The tumble dryer must be installed in a clean place, where dirt does not build up.
Air must be able to circulate freely all round the appliance. Do not obstruct the
front ventilation grille or the air intake grilles at the back of the machine.
To keep vibration and noise to a minimum when the dryer is in use, it should be
placed on a firm, level surface.
Once in its permanent operating position, check that the dryer is absolutely level
with the aid of a spirit level. If it is not, raise or lower the feet until it is.
The feet must never be removed. Do not restrict the floor clearance through
deeppile carpets, strips of wood or similar. This might cause heat built-up which
would interfere with the operation of the appliance.
The hot air emitted by the tumble dryer can reach temperatures of up to 60°
C. The appliance must therefore not be installed on floors which are not
resistant to high temperatures.
When operating the tumble dryer, the room temperature must not be lower
than +5°C and higher than +35°C, as it may affect the performance of the
appliance.
Should the appliance be moved, it must be transported vertically.
The appliance must not be installed behind the lockable door, a sliding door
a door with a hinge on the opposite side to that of the appliance.
32 electrolux installation