Filter
Top Products
Loading door does
not close.
Fine strainer not in place
and/or mesh filter not locked
in place.
Install fine strainer and/or
snap large mesh filter into
place.
When a button is
pressed, led above
Start/Pause button
is lighting in yellow
temporarily.
Washing protection. After
the start of the programme,
the option can no longer be
set.
Turn the programme knob
to OFF Aus. Set the pro-
gramme again.
Programme inactive,
empty water tank
warning led is light-
ing.
Condensate tank is full.
Empty condensate tank,
then start programme with
Start/Pause button.
Drying cycle ends
shortly after pro-
gramme starts.
Not enough washing loaded
or washing loaded is too dry
for selected programme.
Select time programme or
higher drying level (e.g. EX-
TRA DRY Extratrocken in-
stead of CUPBOARD DRY
Schranktrocken).
Drying cycle lasts an
unusually long time.
Note: After around 5
hours the drying cy-
cle ends
automatically (see
„Drying cycle com-
plete ”).
Lint filter clogged. Clean lint filter.
Fluff filter clogged. Clean fluff filter.
DELICATE Schon button
pressed and/or load volume
too big.
Reduce load volume.
Laundry insufficiently spun.
Laundry must be adequately
spun.
Particularly high room
temperature. Temporary
switching off of the com-
pressor to avoid overload.
Automatic process, there is
no fault with the appliance. If
possible, lower the room
temperature.
26 electrolux what to do if ...