Filter
Top Products
Rinse Hold: the water of the last rinse is
not emptied out to prevent the fabrics from
creasing. At the end of the programme on
the display the icon 2.8 is still on: the door
is locked to indicate that the water must be
emptied out.
Night Cycle: the machine will not drain the
water of the last rinse, so as not to wrinkle
the laundry. As all spinning phases are sup-
pressed, this washing cycle is very noise-
less and it can be selected at night or in
times with a more economical power rate.
On some programmes the rinses will be
performed with more water. At the end of
the programme on the display the icon 2.8
is still on: the door is locked to indicate that
the water must be emptied out. To empty
out the water, please read the paragraph
«At the end of the programme».
2.5: Automatic Drying icons
By pressing the button 5 you can choose
one of the required degree of drying for
Cottons and Synthetics:
•
= Extra dry (for Cottons)
•
= Store dry (for Cottons and Synthet-
ics)
•
= Iron dry (for Cottons)
When an automatic drying is performed, the
message AUTOcomes on.
2.6: Extra rinse icon
.
2.7: Selected drying time value
The drying time is displayed in minutes or in
hours and minutes. After the programme
has started the time remaining is updated
every minute.
2.8: Door locked icon
After the programme has started, this icon
is lighted on. When the programme has fin-
ished, this icon disappears. The door can
be opened.
2.9: Child safety lock
(see «Personali-
sation» paragraph).
2.10: Delay icon
This icon illuminates when you set the delay
start.
2.11 (Values)
•
Duration of the selected programme
The duration is calculated automatically
on the basis of the maximum recommen-
ded load for each type of fabric. The du-
ration is displayed in hours and minutes.
The time remaining is updated every mi-
nute.
• End of programme
When the programme has finished three
flashing zeros 0.00 are displayed. The
light of button 8 is off.
•
Incorrect option selection
If an option not compatible with the set
wash programme is selected, the mes-
sage Err is displayed for a few seconds.
The integrated red light of button 8 flash-
es.
•
Alarm codes
Some alarm codes are displayed in the
event of operating problems (see para-
graph «What to do if... »).
•
Delay Time value
The selected delay appears on the dis-
play for a few seconds then the duration
of the previously set programme is dis-
played. The delay time value decreases
by one unit every hour and then. When 1
hour remains, the time decreases every
minute.
2.12: Soil degree icons
•
Intensive
•
Normal
•
Daily
•
Light
•
Quick
•
Super Quick
•
Refresh
•
Super Refresh
When you set a programme on the display
appears an icon indicating the degree of
soiling automatically proposed by the ma-
chine.
2.13: Clock icon
The duration of the set programme is dis-
played by the animation of the clock icon.
2.14: Drying programme phase icons
•
= Drying
•
= Anti-crease
When you set the drying programme, all
drying phase icons are shown. When the
programme has started, the only icon of the
running phase stays on.
2.15: Washing programme phase icons
•
Prewash
•
Wash
•
Rinses
electrolux 7