Filter
Top Products
10
Use
1
2
3
4
5
8
10
6
7
9
11
60°
40°
95°
30°
Temp.
1200
900
700
500
Spin Speed
Prewash
Extra
Rinse
Auto Dry
Extra Dry
Store Dry
Iron Dry
Delay
Start
Start/
Pause
Drying
Time
Drying
Drain
Spinning
Rinses
Prewash/Wash
Drain
Off
Whites
Synthetic
Synthetic Eco
Delicate
Handwash
Wool
Rinses
Spin
Gentle Spin
Coloureds
Cottons Eco
Cottons Dry
Synthetic Dry
Mini 30
Control panel
1 “Temp.” button
The programme selector dial is divided into the
following sections:
• Cottons,
• Synthetics,
• Delicate,
• Wool and Handwash ,
• Special programmes from “Mini 30” and “Gentle
Spin”
• Reset programme/Switching the machine (Off)
The selector dial can be turned either clockwise or
anticlockwise to select the required wash and drying
programme .
Positions “Cottons Eco” and “Synthetic Eco”
correspond to an ENERGY SAVING programme and
to a cold wash.
Before setting the dial to any position ensure that the
machine is switched off.
Important!
At the end of the programme the selector dial
must be turned to position Off.
Drain
Off
Whites
Synthetic
Synthetic Eco
Delicate
Handwash
Wool
Rinses
Spin
Gentle Spin
Coloureds
Cottons Eco
Cottons Dry
Synthetic Dry
Mini 30
2 “Temp.” button
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the machine. The relevant light will light
up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
handwash, 30°C for Mini 30.
Position corresponds to a COLD WASH. This
option can be used for very delicate laundry, such as
curtains.
3 Spin speed button
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
machine. The relevant light will light up. Maximum
speeds are:
• for cotton: 1200 rpm;
• for synthetic fabrics, wool and handwash: 900 rpm;
• for delicate fabrics and “Mini 30” programme: 700
rpm.
RINSE HOLD position : when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
At the end of the cycle, the light of the “Start/Pause”
button goes out, the pilot light remains lit, the
door is blocked and a blinking zero will appear on the
display to indicate that the water must be drained.