Filter
Top Products
Drying rack unpacking
Caution! Before use all packaging parts
and rack must be removed from the
drum
To unpack the rack:
1. Remove upper protection polystyrene
parts by pulling them.
11
2. Lift slightly rack handle (not to the end).
For easiest unpacking turn the rack
upside down
3. Take it carefully out of the drum.
3
2
4. Remove from the drum rest of packing
elements.
Electrical connection
Details on mains voltage, type of current and
the fuses required should be taken from the
rating plate. The rating plate is fitted near the
loading aperture (see “Product description”
chapter).
Connect the machine to an earthed socket,
in accordance with current wiring regula-
tions.
Warning! The manufacturer declines
any responsibility for damage or
injury through failure to comply with
the above safety precautions.
Should the appliance power supply
cable need to be replaced, this must
be carried out by an authorised serv-
ice engineer or a qualified electri-
cian. .
The appliance is supplied with a 13 amp plug
fitted. In the event of having to change the
fuse in the plug supplied, a 13 amp ASTA
approved BS 1363/A fuse must be used.
1
2
3
4
The wires in the mains lead are coloured in
accordance with the following code:
1 Blue - Neutral
2 cord clamp
3 Brown - Live
4 Green and Yellow - Earth
The wire coloured green and yellow must be
connected to the terminal marked with the
letter «E» or by the earth symbol
or col-
oured green and yellow.
The wire coloured blue must be connected
to the terminal «N» or coloured black.
The wire coloured brown must be connected
to the terminal marked «L» or coloured red.
electrolux 25