Filter
Top Products
Selecting additional functions
You can choose from the additional functions
DRYNESS, DELICATE, BUZZER and TIME (if
a TIME programme has been selected). The
symbols of the functions available for the se-
lected programme are shown in the display.
DRYNESS
If laundry comes out of the machine too
damp after a standard drying programme,
you can increase the drying result by using
the DRYNESS function. Laundry becomes
drier as you move from MIN to MAX.
1. Press the DRYNESS button repeatedly
until the desired dryness level (MIN, MED
or MAX) is shown in the display. If another
programme has been selected, AUTO
flashes in the display.
If wool or silk comes out of the machine too
damp at the end of a
WOOL or SILK
programme, you can dry it again by restarting
the appropriate programme, this time with
the DRYNESS function selected and dryness
level MIN, MED or MAX. In the case of a dry-
ing cycle with relatively dry laundry, the length
of the programme cycle displayed at the be-
ginning is corrected after a while.
Caution! Make sure that by selecting
the DRYNESS function, you do not over-
dry your wool or silk.
DELICATE
For especially gentle drying of sensitive fab-
rics with the care label and for temperature-
sensitive textiles (e.g. acrylic, viscose). Pro-
gramme is executed with reduced heat.
DELICATE is only suitable for use with loads
of up to 3kg.
1.
Press the DELICATE button. The
DEL-
ICATE symbol appears in the display.
TIME
To select the programme duration after set-
ting the
TIME programme. You can select
a programme duration from 10 minutes to 3
hours in 10-minute steps. (corresponding to
the
COOLING programme).
1.
Turn the programme knob to the
TIMED PROGRAMME. The
minutes is in the display
2. Press the TIME button repeatedly until
the desired programme duration is
shown in the display, e.g.
for a programme of 20 minutes.
If the programme duration is not selected,
the duration is automatically set to 10 mins.
BUZZER
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions -
BUZZER"
DELAY
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions - DE-
LAY"
CHILD LOCK
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions -
CHILD LOCK"
Starting a drying programme
Press the START/PAUSE button. The pro-
gramme is started. The programme progress
display shows drying progress. The symbols
for
DRYING and COOLING appear in
the display one after the other. The number
of droplets in the dryness indicator gradually
goes down as the drying process progress-
es.
electrolux 15