Filter
Top Products
Installation and connection instructions
45
Installation of the appliance
Transporting the appliance
• Do not place the washing machine on its front or on its right hand
side (viewed from the front). This is to prevent the possibility of the
electronic components becoming wet.
• Never transport the unit without the transport packaging and bolts/
bars. Do not remove the transport packaging until the appliance is at
the installation location. Transporting the unit without the transport
packaging can damage it.
• Never lift the appliance by the door.
When transporting the unit with a sack trolley:
• Attach the sack trolley only at the side. The shovel of the sack trolley
must not be longer than 24 cm, otherwise the float switch can be de-
stroyed.
Remove transport packaging
Important! It is essential to re-
move the transport packaging be-
fore putting the appliance into
operation. Keep all parts of the
transport packaging in a safe
place for future use.
0 1. Open both hose holders on the
appliance's rear side and remove
the hoses and mains cable.
2. Pull both hose holders off the ap-
pliance with a strong pull.