Filter
Top Products
Operating Instructions
19
Running a washing cycle
Brief instructions
A washing cycle consists of the following steps:
0 1. Set the appropriate washing programme:
– Set the programme and temperature using the programme selector
– Select any programme options if required
2. Change the Spin Speed/select RINSE HOLD as necessary.
3. Set the DELAY TIMER as required.
4. Open the door and load the washing.
5. Close the door.
6. Add detergent/conditioner.
7. Start the washing programme by pressing the START/PAUSE button.
After the washing programme has ended:
Important! If the washing cycle has ended with a Rinse Hold, select
DRAIN, SPIN or SHORT SPIN before opening the door.
8. Open the door and remove the washing.
9. To switch off the washing machine, turn the programme selector
to OFF.
Setting the wash programme
3
See “Programme tables“ for a suitable programme, correct temperature
and possible options to suit the type of washing.
0 1. Set the programme selector to
the desired wash programme
with the desired temperature.
The expected duration of the
programme selected is displayed
in the multi display in minutes.