Filter
Top Products
2. Remove the conditioner insert from the middle compartment.
3. Clean all parts with water.
4. Put the conditioner insert in as far as it
will go, so that it is firmly in place.
5. Clean all parts of the washing ma-
chine, especially the nozzles in the top
of the washing-in chamber, with a
brush.
6. Insert the detergent dispenser drawer in the guide rails and push it in.
Washing drum
Rust deposits in the drum may occur due to rusting foreign bodies in the
washing or tap water containing iron.
Important! Do not clean the drum with acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum with a cleaning agent for stainless
steel.
2. Run a washing cycle without any laundry to clean off any cleaning agent
residues. Programme: COTTONS/LINEN 90° or 95°C, press the button
6, add
approx. 1/4 measuring cup of detergent.
Door seal
Check the door seal from time to time and remove any
possible objects that could be trapped in the fold.
31
Care and cleaning
132963810_EN.qxd 06/06/2008 11.46 Pagina 31