Filter
Top Products
16
Use
RINSE HOLD: by selecting this option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. At the end of the programme,
0 and
RINSE HOLD symbol appear on the display, DOOR symbol (door locked) remains
lit, the pilot light of button
7 goes off and the door is locked to indicate that the
water must be emptied out.
NIGHT CYCLE: by selecting this option, the machine will not drain the water of
the last rinse, so as not to wrinkle the laundry. As all spinning phases are
suppressed, this washing cycle is very quiet and it can be selected at night or in
times with a more economical power rate
. In some programmes the rinses will be
performed with more water. At the end of the programme,
0 and RINSE HOLD
symbol appear on the display, the DOOR symbol remains lit, the pilot light of
button
7 goes off and the door is locked to indicate that the water must be
emptied out.
To empty out the water, please read chapter «At the end of the
programme».
Select the desired option by pressing the button 4 and confirm
your choice by pressing the button 5
Depending on the programme, different functions can be combined.
Attention: Not all the options are compatible among themselves. The symbols of
the incompatible options disappear.
Anyway, if an option, which is not compatible with the set washing programme
or any other option, is selected, the Err message is displayed for a few seconds
and the yellow pilot of button
7 light starts blinking.
You must select the options after you have selected the programme but before
pressing the button
7. Press the button 4: all the option symbols appear on the
display.
To scroll all the available options, press the button
4. The corresponding symbol
appears on the display and starts blinking.
Press the button
5 to activate and confirm your choice. A black dash appears
under the selected symbol to indicate that this option has been set. Press the
same button to deactivate the option.
After selecting the options, wait a few seconds until the display gets back to the
default status. The selected options appear on the display.
For the compatibility between this option and washing programmes consult the
chapter
«Washing programmes».
132963810_EN.qxd 06/06/2008 11.46 Pagina 16