Filter
Top Products
40
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.
1. After removing all the packaging, carefully lay
machine on it’s back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the
draining hose from the hose holders on the rear of
the appliance.
3. With the supplied spanner unscrew and
remove the central rear bolt
A.
Installation
HEC0008
A
HEC00022
HEC0001
132963810_EN.qxd 06/06/2008 11.46 Pagina 40