Filter
Top Products
38
0 Take-out the latched catch covering J and pull-off the plug.
0 Connect the door catch H and the catch covering J on the respective
opposite side to the plug, insert into the break-out and screw-down or
latch into position.
0 Push the door with the hinges into the breakouts provided for them in
the front panel of the appliance and firmly attach it with the screws.
0 After changing-over the door, check that the DOOR button functions
correctly.
1
Warning! The appliance is safe again for operation only when all plas-
tic parts have been mounted.
Special accessories
You can obtain the following special accessories from your retailer.
Drainage kit
A drainage kit (E-No. 916 019 000) can be purchased to adapt the dryer
to drain the condensed water into an existing drain, sink etc. This elim-
inates having to empty the condensed water reservoir, although the
reservoir must still be inserted into the control panel of the machine.
Stacking kit
With these kits you can combine your laundry dryer with any LAVAMAT
automatic washing machine to a washing and drying column. The
appliances are stacked in space-economising manner in this arrange-
ment, the washing machine at the bottom and the laundry dryer at the
top.
The following two kits are available:
– without plate E-No. 916 018 900
– with extendible deposit plate E-No. 916 018 901