Filter
Top Products
Drying
16
• AUDIBLE SIGNAL button
During the crease-protection phase (immedi-
ately after the drying phase), an acoustic sig-
nal is sounded at intervals (see "End of drying
process").
• SPECIAL CARE button
This program operates with reduced heat.
Press the SPECIAL CARE button for fabrics
bearing the care symbol S. Gentle drying is
advisable for heat-sensitive fabrics (such as
acrylic and viscose).
• QUICK button
The selected program runs with shortened
program duration for the same degree of
drying.
Start DELAY TIMER
With the DELAY TIMER function you can delay the start of the drying
program by 1 to 19 hours.
0 Setting the program.
0 Hold the DELAY TIMER button pressed
until the desired number of hours of
delay of the program start appears in the
display field for PROG. TIME.
0 Press the START/PAUSE button.
After elapse of the set number of hours the dryer
automatically starts the set drying program. The
PROG. TIME display field shows the number of
hours after which the drying program will start.
You can correct the pre-selected start delay time
at any time.
Start the drying program
0 Press the START button.
The drying program starts. The program
progress is indicated on program phase dis-
play.