Filter
Top Products
16
Special applications
Load adjust
Load adjust adjusts the water and
power consumption to each
programme - according to the
amount of laundry and type of
textiles.
The auto load function is
aĂcomponent of your washing
machine and runs automatically.
This keeps the energy and water
consumption as low as possible.
The flow sensor measures the
water flow rate like an internal water
gauge and meters the exact volume
of water required by the amount of
washing.
The stepless water level sensor
ensures the correct water level
required to wash your laundry in
eachĂprogramme.
Unbalanced load detection
system
The automatic unbalanced load
detection system spins the laundry
several times to ensure even
distribution.
If the washing is very unevenly
distributed, it is not spun for
reasons of safety or the end speed
is reduced.
In the Woollens programmes the
spin cycle is attempted only twice in
order to prevent felting.
Time
When a programme has been
selected, the expected programme
duration is displayed.
Time deviations are caused by:
- load amount
- Multiple spinning if the laundry
isĂdistributed poorly in the
drum.
- Additional rinse cycle if
excessive foam is in the
laundry.
- too low water pressure
- Selection of an additional
option, e.g. Rinse Plus, after
the programme has started,
As a result of this and other
properties, the wash time changes
accordingly.
i
If no additional options were
selected and if no other
changes occur, the wash cycle
will end at the indicated time.