Filter
Top Products
24
EN
Auxiliary functions
Auxiliary Function Selection Buttons
a b c d
• Depending on the program, you can
select the desired auxiliary function by
pressing the buttons a, b, c,d.
• Select the required auxiliary functions
before starting the program.
• Some combinations cannot be
selected together. Ex.: Pre-wash and
Quick Wash.
• Symbol of the selected auxiliary
function will light up.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
Ex.: If you want to select pre-wash first
and then quick wash, pre-wash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see, “Program Selection Table”)
• Prewash
When you select this function (a), the
display will indicate “F1” symbol.
• A pre-wash is only worthwhile for
heavily soiled laundry. Without
pre-wash you save energy, water,
detergent and time.
• Pre-wash without detergent is
recommended for lace and curtains.
• Quicker Wash
With this function (b), the wash time is
shortened. “F2” symbol lights up on the
display.
• Use this function for smaller amounts
or slightly soiled laundry.
• Extra Rinse
When this function (c) is selected,
washing and rinsing is performed with
plenty of water. “F3” symbol lights up on
the display.
• Anti-Crease
With this function (d), drum movement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level. “F4” symbol lights up on the display.
• Use this function for delicate laundry
that crease easily.
C
Whenever you select this auxiliary
function, load your machine with half
of the maximum laundry specified in
the program table.
• Rinse Hold
If you are not going to unload your
clothes immediately after the program
completes, you may use rinse hold
function and keep your laundry in the
final rinsing water in order to prevent
them become creased when there is no
water in the machine. Press “Start/Pause”
button after this process if you want to
drain the water without spinning. Program
resumes. Your machine drains the water
and program completes.
If you want to spin your laundry that you
left in water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine drains
the water, spins the laundry and program
completes.
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.