Beko WMC61W Washer User Manual


  Open as PDF
of 36
 
9 EN
Removing packaging
reinforcement
Tilt the machine to remove the
packaging reinforcement. Remove the
packaging reinforcement by pulling the
ribbon.
Opening the transportation
locks
C Transportation safety bolts must
be removed before operating the
washingmachine!Otherwise,the
machine will be damaged!
1. Loosen all the bolts with a spanner
untiltheyrotatefreely(“C”)
2. Remove transportation safety bolts
by turning them gently.
3.Fitthecovers(suppliedinthebag
withtheOperationManual)intothe
holesontherearpanel.(“P”)
CKeepthetransportationsafetybolts
in a safe place to reuse when the
washing machine needs to be moved
again in the future.
C Never move the appliance without the
transportation safety bolts properly
fixed in place!
Appropriate installation
location
Install the appliance in environments
which have no risk of freezing, in a
stable and level position.
C The floor must be capable of carrying
the load on it!
C If the washing machine and a drier
are placed on top of each other, their
approximate weight together may
reach 180 kg when they are full.
Important:
•Donotplacetheapplianceontopof
the power cable.
•Keepatleast1cmdistancefromthe
edges of other furniture.
•Placethemachineonafirmsurface;
do not position it on a long pile rug or
such like surfaces.
Adjusting the feet
C Do not use any tools to loosen the
locknuts.Otherwise,theycanbe
damaged.
1.Manually(byhand)loosenthelock
nuts on the feet.
2. Adjust them until the machine stands
level and firm.
3.Important:Tightenalllocknutsup
again.
3 Installation
 previous next