Beko WMC61W Washer User Manual


  Open as PDF
of 36
 
21 EN
Child-proof lock
There is a childproof lock to prevent
any program interruption because of
pressing the keys while the program is
on.
C
Yourmachinecanbeturnedonand
offwithOn/Offbuttonwhilethechild-
proof lock is activated. In this case,
your machine will resume its program
with child-proof lock activated.
In order to activate the childproof
lock, press on the 1st and 2nd
auxiliary function keys from the left
simultaneously for 3 seconds after
the washing program has started.
1st auxiliary function light will flash
continuously.
To start a new program after the
program is over or to interfere the
program, childproof lock should be
deactivated. To deactivate the child-
proof lock, press the same buttons for
3 sec.
Ending the program through
canceling
The program which is selected first will
keep on going even if the position of the
program selection button is changed. A
new program can be selected or started
after“Programiscancelled”inorderto
change the washing program.
Tocancelanyselectedprogram;
• Press“Start/Pause/Cancel”button
for 3 seconds. The machine starts
todischargethewater.“Wash”and
“ProgramFinished”lightswilllightup.
• “Start/Pause/Cancel”and“Wash”
lights will go off after discharging
processisoverandthe“Lid”lightwill
start flashing.
• “Lid”lampwilllightupcontinuously
whenthedoorisunlocked.Youcan
select and start a new program.
• Iftheprogramiscancelledinthe
middleoftheprocess,“Wash”and
“ProgramFinished”lightswilllightup.
The machine can drain all the water
or can take in water for 3 times at
most to cool down the clothes and
complete draining process.
• Whenthewaterdischargingprocess
iscompleted,the“Wash”lightwillgo
off,“ProgramFinished”lightwilllight
upandthe“Lid”lightwillcontinuously
flashuntilthedoorisunlocked.You
can make a new program selection
whenthe“Lid”lightisilluminated
continuously.
End of Program
The“ProgramFinished”lamponthe
program follow-up indicator will light up
when the program comes to an end.
The lid is unlocked 2 minutes later, the
“ProgramFinished”and“Lid”lampswill
light up continuously. The machine is
now ready for a second cycle.
If any key is pressed when the machine
is at the end of the program or if
the position of the selection knob is
changed,the“ProgramFinished”light
willgooffandonlythe“Lid”lampwill
remainaslit.Meanwhile,ifthedooris
stilllocked,the“Lid”lightwillcontinue
flashing until the door is opened.
Pressthe“On/Off”buttontoshutdown
the machine.
 previous next