Filter
Top Products
EN
22
cancellation was made will remain lit and
“End” will appear on the screen.
Program in rinse hold mode
•
This process is shown with the
flashing Spin Symbol and the lit up
Standby Symbol.
If you wish to spin when the machine is in
thismode:
Adjustthespinspeed.Press“Start/Pause/
Cancel” button. The program continues,
pumps out the water and spins. The
Standby Symbol fades out and Start
Symbol lights up.
If you want to discharge the water only
withoutspinning:
Press“Start/Pause/Cancel”button.
The Standby symbol will fade. The
Start symbol will light up. The program
continues and only drains the water.
End of program
When the program is finished, the
symbols of the relevant steps will remain
lit up and the auxiliary function, spin and
temperature data selected at the start-up
of the program will remain selected. “End”
will appear on the display.