Filter
Top Products
EN
10
discharge, the end of the hose must
not be submerged in the drain water.
The end of the hose must be able
to take in air. The hose should be
pushed into the drainage for more
than 15 cm. If it is too long you may
have it shortened.
• Theendofthehoseshouldnotbe
bent, it should not be stepped on and
it must not be folded between the
drain and the machine.
• Thelengthofthehoseistooshort,
you may add an extension hose to the
original section. The length of the hose
must not be longer than 3.2 m after
coming out of the machine. To avoid
water leakage failures, the connection
between the extension hose and the
drain hose of the product must be
fitted well with an appropriate clamp
as not to come off and leak.
Electrical connection
Connect the machine to an earthed outlet
protected by a fuse of suitable capacity.
Important:
• Connectionshouldcomplywith
national regulations.
• Powercordplugmustbewithineasy
reach after installation.
• Thevoltageandtheallowedfuse
protection are specified in the section
“Technical Specifications”.
• Thespecifiedvoltagemustbeequal
to your mains voltage.
• Connectionviaextensioncordsor
multi-plugs should not be made.
B
A damaged power cable must be
replaced by a qualified electrician.
B
The appliance must not be operated
unless it is repaired! There is the risk
of electric shock!
Destroying the packaging
material
Packagingmaterialcanbedangerousto
children.Keepthepackagingmaterialsout
of reach of children or dispose them by
classifying according to waste directives.
Do not dispose them together with normal
domestic waste.
Packagingmaterialsofyourmachineare
manufactured from recyclable materials.
Disposing of the old machine
Dispose of your old appliance in an
environmental friendly manner.
• Youmayrefertoyourlocalagentor
solid waste collection center in your
municipality to learn how to dispose of
your machine.
Beforedisposingofyouroldwashing
machine, cut off the mains plug and make
the door lock unusable.