Filter
Top Products
EN
17
the door ajar to allow the inside of the
machine get dry.
C
This is not a program for washing
laundry. This is a maintenance
program for the machine.
C
Never use this program if there is
something in your machine.
C
When this feature is started your
machine senses the load inside of it
automatically, if any, and interrupts the
program.
Special programs
For specific applications, select any of the
followingprograms:
• Rinse
This program is used when you want to
rinse or starch separately.
• Spin + Drain
This program spins with maximum
possible rpm in the default setting after the
water drains from the machine.
C
Use a lower spin speed for delicate
laundries.
Temperature selection
Whenever a new program is selected, the
temperature anticipated for that program
appears on the temperature indicator .
To change the temperature, press
the temperature button. Temperature
decreases in 10° increments.
Cold selection is shown with “-” symbol.
When the “Temperature” button is pressed
after Cold is selected, the maximum
temperature of the program you have
selected will be displayed.
To decrease the temperature, press the
“Temperature” button again.
90˚C
Normally soiled, white cottons and
linens.(Ex.:coffeetablecovers,
tablecloths,towels,bedsheets)
60˚C
Normally soiled, fade proof colored
linens, cottons or synthetic clothes
(Ex.:shirts,nightgowns,pajamas)
and lightly soiled white linen clothes
(Ex.:underwear)
40˚C
30˚C
Cold
Blendedclothesincludingsynthetics
and woolens as well as delicates.
Economy Symbol
Shows energy saving programs and
temperature selections.
As “Intensive” and “Hygiene” programs are
long programs with higher temperature
selections to ensure hygiene, “Economy”
Symbol will not light up.
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To decrease the spin speed, press the
“Spin” button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “
” and no
spin is shown with “
” symbols.
F2
F4
F1
F3
If you are not going to unload your clothes
immediately after the cycle, you may use
rinse hold function in order to prevent your
clothes become wrinkled when there is no
water in the machine. With this function,
your laundry is kept in the final rinsing
water. If you want to spin your laundry
aftertherinseholdfunction:
- Adjust the spin speed.
- Press“Start/Pause/Cancel”button.
Programresumes.Yourmachine
drains the water and spins your
laundry.
Youcanusenospinfunctioninorderto
drain the water without spinning at the end
of the program.