Filter
Top Products
User’s Manual
53 / EN
Maintenance and cleaning
6.2 Cleaning the loading door and the drum
Residues of softener, detergent and dirt may accumulate in your machine in time and may cause unpleasant
odours and washing complaints. To avoid this, use the Drum Cleaning programme. If your machine is not
featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or
Extra Rinse auxiliary functions as well. Run the programme without any laundry in the machine. Before
starting the programme, put half a cup (max. 100 g) of a suitable anti-limescale powder into the main
wash detergent compartment (compartment nr. "2"). If the anti-limescale is in tablet form, put only one
tablet into compartment nr. 2. Dry the inside of the bellow with a clean piece of cloth after the programme
has come to an end.
C
NOTE
¾ Repeat Drum Cleaning process in every 2 months.
¾ Use an anti-limescale suitable for the washing machines.
After every washing check that no foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.
C
NOTE
¾ Foreign metal substances will cause rust stains in the drum. Clean the stains on the
drum surface by using cleaning agents for stainless steel. Never use steel wool or wire
wool.
A
CAUTION
¾ Never use sponge or scrub materials. These will damage the painted and
plastic surfaces.