Filter
Top Products
20 / EN
Washer-Dryer
Installation
3.8 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for
any damages that will arise when the product is used without grounding in accordance with the local
regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current fuse or circuit breaker is less than 16 Amperes, please have a qualified electrician install
a 16 Ampere fuse or circuit breaker.
• The voltage specified in the "Technical specifications" section must be equal to your mains voltage.
B
DANGER
¾ Damaged power cables must be replaced by the Authorized Service
Agents.
3.9 Transportation of the product
1 Unplug the product before transporting it.
2 Remove water drain and water supply connections.
3 Drain all water that has remained in the product. See. 6.6
4 Install transportation safety bolts in the reverse order of removal procedure; see 3.3.
DANGER
¾ The weight of your product is not suitable to be carried by one person.
¾ The product is heavy; it should be carried by two persons very carefully
on the stairs. Falling of your product on you may cause disabilities.
A
CAUTION
¾ Packaging materials are dangerous to children. Keep packaging materials
in a safe place away from reach of the children.
C
NOTE
¾ Never move the product without the transportation safety bolts properly fixed in place!