Filter
Top Products
User’s Manual
15 / EN
Installation
3.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement
by pulling the ribbon.
DANGER
¾ The product is heavy. Remove the packaging reinforcement as
illustrated.
¾ Pay attention not to squeeze your hand under the machine during this
procedure.
3.3 Removing the transportation locks
A
CAUTION
¾ Do not remove the transportation locks before taking out the packaging reinforcement.
¾ Remove the transportation safety bolts before operating the washing machine!
Otherwise, the product will be damaged.
1 2 3
1 Loosen all bolts with the tool supplied in the User Manual bag until they turn freely. (C)
2 Remove transportation safety bolts by turning them gently.
3 Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)
C
NOTE
¾ Keep the transportation safety bolts in a safe place to reuse when the machine needs to
be moved again in the future.
¾ Never move the product without the transportation safety bolts properly fixed in place!