Filter
Top Products
EN
9
C
If the power cord is damaged, it
must be replaced by a cord or
special unit provided by either the
manufacturer or your after sales
service.
C
With built-in washing machines,
the plug must be accessible after
installation.
Pre-cleaning
When your washing machine has been
correctly installed, we recommend that
you pre-clean the machine.
This is to check that the installation,
the connections and the drainage are
all correct, and to thoroughly clean the
inside of the washing machine before
any wash programmes are run (see the
operating instructions on the following
pages).
• Select the normal programme at
60ºC.
• Press the Start/Stop button.