Filter
Top Products
EN
16
Starting up
Start/Stop button
• To start up the washing machine
you have to press the Start/Stop
button.
The minutes remaining until the end
of washing and drying will appear on
the display at all times.
Child/key lock function
Child/key lock function selection
The lock function ensures that the
programme will not be affected if any
buttons are pressed. It is used when
children could press the buttons, etc.
The Child/Key Lock function should be
activated after the wash programme
has been selected together with all its
options.
Activating the lock function
• The lock function is activated by
pressing the Start/Stop button
and holding it down for at least 3
seconds. The display will show if it is
activated.
Deactivating the lock function
• The lock function is cancelled when
the wash programme comes to an
end.
If you want to deactivate the lock
function before the end of the
programme, you have to hold the
Start/Stop button down again for at
least 3 seconds. After 3 seconds,
the lock function indicator will
disappear from the display, and it
will go into pause status. Turning to
Off position “0” does not cancel the
lock.