EN
8
• If the length of the hose is too short,
add an original extension hose. The
maximum length of the hose must
not be longer than 3.2 m from the
machine outlet. To avoid water leak
failures, the connection between the
extension hose and the drain hose
of the product must be well fitted
with an appropriate clamp so that it
will not come off and leak.
Electrical connection
Consult the specification plate located
on the hatch door of the washing
machine before making the electrical
connections. Ensure that the voltage
reaching the plug is the same as that on
the plate.
Do not remove the specification
plate. The information on it is
important.
Levelling
C
Use the adjustable feet to level the
washing machine. This will reduce
the noise level and prevent it from
moving during use.
C
Do not bring the feet too far out, you
will achieve better stability.
C
You need to use a spanner for the
models that have a nut.
C
It is very important to correctly earth
the washing machine. The electrical
installation, plug, socket, fuses
or automatic switch and counter
must be correctly specified for the
maximum power indicated on the
specifications plate.
C
Do not plug the washing machine
plug into the socket with wet or
damp hands.
C
To remove the power cord, pull on
the body of the plug.